Click on image for full size
Monthly Archives: November 2016
A Nifty Borde Pot Stand
I’ve had this little Borde stove for some time. But, it came without a pot stand. I put this pot stand together from stainless steel sheet. The sheet is 0.032″ thick. The legs are from stainless steel tube 1/4″ in diameter. The pot support rods are 5mm stainless steel rod. All the stainless is 304. I made 1/4″ long plugs of some of the rod which I TiG welded into the ends of the pot support legs. The 1/4″ tubing legs are silver brazed to the sheet sides. The stand forms a triangle about 5″ long per side.
After all the fabbing work was done, I gave the whole thing a polish up to make it look pretty. You can see the stand in use in a YouTube video at my BernieDawg Cinema channel: https://youtu.be/I_GQG8TbO_s
It works great and folds down small. A-OK by me. You can click on the images for bigger views. Maybe this will give you some ideas or inspire you to try to make something for your stoves. Gear-building is fun!
Primus 100 Silent Cap?
Dear BernieDawg
I found a great old Primus 100. It works well and is very nice. But, how can I make it more quiet for use in camp in the early morning ? Thank you for your help!
Noisemaker
–
Hi Noisemaker
The Primus 100 stoves are among my favorites. A silent damper cap can make your stove quieter, and also generate a better fuel/air mix for efficient burning.
–
Best choice is a Primus 4010 silent damper cap. They work super awesome on the 100s.
Base-Camp in England had some of the 4010’s a while back, but they’ve sold out of them now. Watch for a possible (though unlikely) return of the 4010 at Base-Camp sometime in the future, or ask around to some of the stove forums. Perhaps someone there would sell you one of their extras.
–
Another good choice for a Primus 100 silent damper cap is to fab up a cap adapter I call a spigot plate. I’ve made lots of these over the years. It’s a great newbie brazing project for anyone who wants to work on stoves.
–
Basically, you take a round piece of sheet metal with a hole in the center and braze a short piece of 5/8” diameter tubing to the middle.
The spigot plate holds the inner cap centered, and the outer cap settles around the inner cap.
You can make the diameter of the sheet metal base to fit either the first or the second ledge in the lipstick burner bell and then just use a regular cap set with the stove.
Good luck on this project. It can be done with hand tools and an electric drill. You don’t need specialized tools.
Happy camping!
BD