Hi folks
If you want to buy a BD silent damper cap for your modern or vintage stove. Now is the time. You have a deadline of 28/5/2025 (May 28th, 2025) to place that order.

https://i.materialise.com/en/shop/designer/gary-adams

Cap instructions: https://www.berniedawg.com/berniedawg-silent-damper-cap-instructions/

Here is why.
I received this email on 16/5/2025:

Will there be more caps sometime in the future from some other outlet? Maybe or maybe not. I ain’t getting any younger and the logistics of setting up another source are daunting. So! If you want one, NOW is the time to act. Sorry this is this way. Dumb that I get less than two weeks notice and have to pass that on to you. Out of my control however. Still, I’m so sorry it should be that way.

Link again: https://i.materialise.com/en/shop/designer/gary-adams
BD

Here are the four images of the Optimus 111C Hiker stove manual as lower-res jpgs.

And, here’s a really nice hi-res PDF of the 111C Hiker stove manual:
Optimus111C High Quality Manual

Swedish-made Svea 123R with spindle key

Spindle key detail

Svea 123R – Loosen fuel cap

Svea 123R – Adjust spindle nut and tighten graphite packing

Svea 123R – loosen/tighten jet

The predecessor of the Svea 123R is the Svea 123 (it has no “R” in the stove name.) The spindle key that was bundled with Svea 123R stoves also had cutouts for this earlier version, the Svea 123. The keys were used interchangeably during the years that both types of stoves were co-produced.

Svea 123R stove on right. Svea 123 (no R) on the left.

The spindle nut is smaller on the Svea 123, and the opening in the photo below is used to tighten or loosen the spindle nut. Usually used to tighten the nut as the graphite packing in the spindle wears with use.

This part of the tool is for the spindle nut on the Svea 123 (no R)

This part of the tool is for the smaller jet on the Svea 123 (no R)

The cheaply made and low quality Optimus Svea 123R stoves now coming out of Taiwan still feature a spindle key that includes the opening for the Svea 123 spindle nut even though the Taiwanese never made that stove and that stove stopped being produced in Sweden pre-1970.

Some people, new to these sorts of stoves, or with little background on these stoves, will claim that the Taiwan stoves are of equal quality. But, sadly, those people have never had a genuine Swedish-made Svea in their hands. It is fairly well documented on social discussion forums about stoves that the Taiwanese Svea 123R stoves are of lesser fit and finish than the original Swedish made stoves. There have been quite a few reports about failures to positively shut-off straight out of the box. In my own work repairing stoves I have had a half dozen brand new Taiwanese Svea 123Rs sent to me in just the last year for failures to positively shut-off. The spindle seats are often poorly formed and the brand new stoves will leak right out of the box. If you are considering the purchase of a Svea 123R, PLEASE buy a used vintage one. There are lots of them around and they are much better made than the poor quality Taiwan stoves.

Or, just use the JPGS below. Feel free to distribute far and wide and download onto your device. Knowledge should be free!

Jpeg files:

PDF copy for better resolution: Manual_Optimus_8R

Here are the links to the 111B series:

Optimus 111B Stove Repair Part 1 – Disassembly
https://youtu.be/L-A9IAcaVhA

Optimus 111B Stove Repair Part 2 – Parts Reassembly
https://youtu.be/b-d_YVVuLaA

Optimus 111B Stove Repair Part 3 – Final Assembly and Testing
https://youtu.be/sGo62unFInk

OR… watch them imbedded right here, right now. You can see a lot more detail if you watch full screen.
These are copyrighted videos and are found exclusively here at my stove blog and at my YouTube stove channel. https://www.youtube.com/channel/UC-HRgttvZQQtg7_G0_T6Sqw/
If you see these videos at some other website, they have been stolen and the website moderators/owners are thieves and are in violation of copyright law. Please let me know if you see someone ripping off my hard work for their own benefit – those people who do that sort of stuff are the lowest form of self-serving scum. (Not to be too harsh, or anything.)   Report scumbag thieves to: berniedawgstove@comcast.net
Thanks!   BD

The embossed case was stripped, derusted, and repainted. The left hinge on the case was separated – the spot weld had failed. I silver brazed the hinge back in place before prepping and repainting.

Here are the beauty shots.

Sadly… the client was better at buying old stoves than actually operating them. Within three months of this restore the inept client had set the stove on fire, destroyed the paint, and melted part of the copper windshield surround. Sigh. :-(((